Folding Counter Instructions
1) Please always transport the folding counter upright if you do not have a transport bag. Release the retaining strap.
2) Fold the side panels backwards. Make sure that the protected countertop does not fall out.
3) First remove the polystyrene packaging block (1), then the countertop (2).
The polystyrene packaging block (1) is tightly fitted and should always be used for transport
4) Place the countertop onto the folding counter with the pre-drilled holes facing downwards.
Shorter hole-to-edge distance = operator side
5) Check that all 4 pins are correctly seated in the corresponding pre-drilled holes.
Done!
Display Securing Mechanism
The displays are attached to the aluminum folding counter using an adhesive film (Fig. 2). After mounting the displays, the self-adhesive display securing tabs (Fig. 1) should be placed on the aluminum at the four corners, as close to the display as possible.
Storing the internal shelf
Place both cords onto the top of the table as shown. Pull the lower cord toward you and cross it over the upper cord to form a loop (Fig. 3).
Place the internal shelf with this loop into the side of the folding counter, ensuring the cord does not obstruct the closing mechanism.
When opening, ensure that the internal shelf is removed in good time.
